Chat with us, powered by LiveChat

WALL MONITORS

We are concrete specialists and carry out repairs on sea walls, at riverside properties and moorings both above and below the waterline

Book your Free Consultation on our Secure Form

Save 10+ Hours of Research – We Advise on Everything You Need on your Seawall Repair Journey

We will never sell, give or barter your email address to anyone else. This is a ‘one-time’ form to be used for short-term contact with you about your specific project and we promise to never fill your inbox with unwanted trash emails. You will not be subscribed to any lists and your email will be deleted from our website 30 days after the last contact we receive from you.

Get a Quote For Your Project

No Project Too Big Or Too Small

We provide a range of monitoring devices for multiple applications including monitoring of cracks and their movement, tilt via accelerometer across three axes: up and down, side to side and forward and backward (In layman’s terms).

These devices record movement at a set point in time every 8 hours by default, are installed once for a minimum of 6 months contract. The device is zeroed and readings are taken and compared to a zero value. From this data we can detect movement patterns and report in weekly, daily or monthly intervals. Premium customers get access to our portal to be able to pull reports at any time.

Wood rot and woodworm

All our structural analytics services are supplied through our sister company Structural Analytics. With branches in Amersham, Staines and High Wycombe, we cover the UK with ease.

Monitoring opportunities include rail, civil, corporate and domestic applications and our technology has been used all over the world.

Non-intrusive high-tech monitoring that can be installed within three weeks from time of order.

We have the skills in house to monitor structural changes along the sea front with our structural analytics devices. Designed around movement on three axes, and having the capability to monitor G Force, Tilt and even the distance across cracks, we have the ability to sometimes predict a scenario before it becomes an actual disaster. 

How monitoring works:

After installation and being set to zero the monitoring device wakes up at set intervals to report. The default setting is every 6 hours – this gives 4 reports per 24hrs. The report will show a line graph detailing a time stamp of the triggered report, and showing the distance of movement detected.

Each time the device wakes up and takes a measurement, it also sends the report to our servers. Our report to your email, or for premium customers; to your dashboard will be set at the intervals you choose: Every 6 hours, Every 12 hours, Every 24 hours, Every week or Every month.

Wood Rot and woodworm

For premium customers, the device can also be set to trigger an alarm if sufficient movement is detected above a certain threshold. This alarm could be via SMS, or a Dashboard alert, or an Email if required.

Any settings changes will result in a faster resource usage than our guaranteed 1 Yr in the field between charges. Any call out to recharge could result in service charges, all of which will be made clear at the time of the initial setup.

In areas of low GSM signal, we have extenders for the aerial but these will use up battery fairly quickly. We also have a WiFi version coming out soon, that can be mains powered as well. Our approach to all situations is to get the data, make sure the data is not compromised in any way, and report on it to the best of our ability. We pride ourselves in developing solutions to assist our customers.

Not to be compared with a cheap manual marker, what we offer is a state of the art, British Designed and Made, High Tech reporting device.

Crack Metres Repaired

Wall Ties Replaced

We have over 30 Years experience

If a structure you manage has suffered structural damage because of bad sea;waterside conditions or foundations affecting structural integrity, you need to act quickly to stop things getting worse. Call Structural Repairs for a free monitoring consultation so that we can put our structural engineering skills to work for you.

Wall Monitoring

Reporting Movement Since 1998

We provide a range of monitoring devices for multiple applications including monitoring of cracks and their movement, tilt via accelerometer across three axes: up and down, side to side and forward and backward (In layman’s terms).

These devices record movement at a set point in time every 8 hours by default, are installed once for a minimum of 6 months contract. The device is zeroed and readings are taken and compared to a zero value. From this data we can detect movement patterns and report in weekly, daily or monthly intervals. Premium customers get access to our portal to be able to pull reports at any time.

All our structural analytics services are supplied through our sister company Structural Analytics. With branches in Amersham, Staines and High Wycombe, we cover the UK with ease.

Monitoring opportunities include rail, civil, corporate and domestic applications and our technology has been used all over the world.

Non-intrusive high-tech monitoring that can be installed within three weeks from time of order.

We have the skills in house to monitor structural changes along the sea front with our structural analytics devices. Designed around movement on three axes, and having the capability to monitor G Force, Tilt and even the distance across cracks, we have the ability to sometimes predict a scenario before it becomes an actual disaster. 

wood rot
wood rot

Residential OR Commercial, We’re Here For You.

Get Your Free Consultation Today!

Address

Unit 19, Tims Boatyard, Timsway Staines-Upon-Thames, Middlesex

Hours

Service: 24/7
Office: 8am – 5pm M-F

Do NOT follow this link or you will be banned from the site!